Shelly Analog 0-30 V Add-on for Shelly Pill

Code: SHELLY-ANALOG-0-30V-ADD-ON
Action New arrival
Not rated Rating details
€6,90 –11 %
Shelly Analog 0-30 V Add-on, analógový modul na meranie DC napätia pre Shelly Pill
€6,90 –11 % €6,09 €4,95 excl. VAT Measure price:
In stock (5 pcs)
Delivery to:
24.11.2026
Delivery options

Shelly Analog 0-30 V Add-on extends the Shelly Pill module with DC voltage measurement up to 30 V. Monitor batteries, solar setups, power supplies or 0-10 V analog sensors directly in the Shelly Smart Control app. To connect it to the Pill, you need the Micro USB to 5-Terminal Add-on.

Detailed information

Product detailed description

Analog add-on and DC voltmeter for Shelly Pill: measure voltage from 0 to 30 V

Shelly Analog 0-30 V Add-on is a small expansion module for Shelly Pill that turns it into a smart Wi-Fi voltmeter. On its own, the Pill can measure only 0 to 2.5 V on its analog input. With this add-on you can measure DC voltage up to 30 V DC, so you can remotely monitor the voltage of a 12 V car battery, a 24 V solar setup, a backup power supply (UPS) or the output of an industrial 0-10 V sensor.

In addition to the analog input (AN), the module also has two configurable digital inputs/outputs (IO2 and IO3, 3.3 V logic) and a 5 V output for powering connected sensors. It connects to the Pill via the Shelly Micro USB to 5-Terminal Add-on, which is sold separately.

In practice, you connect the voltage you want to monitor to the AN terminal and the Shelly Pill sends it over Wi-Fi to the Shelly Smart Control app. There you can set up alerts and automations: for example a notification when the battery voltage in your caravan drops below 11.8 V, or switching off an appliance via another Shelly device when the solar battery is discharging. Measurement accuracy is ±(2 % + 5d). That is more than enough for tracking charge levels and trends, but it is not meant for laboratory measurements.

The digital pins IO2 and IO3 make this Shelly voltage measurement module more than just a voltmeter. As inputs, you can connect a reed contact, a button or a float switch (the input is active LOW, i.e. when connected to GND). As outputs, they handle a 3.3 V logic signal with up to 20 mA, which is enough for a status LED or a control signal. If you need to switch a bigger load, the Shelly SSR Add-on with a solid-state relay is also available for the Pill.

The whole setup is small: the add-on measures just 36.5 × 26.5 × 11.5 mm and weighs 8 g. Together with the Pill it fits into a junction box, a solar power plant distribution board or a caravan storage compartment. If you already use the Shelly Pill, for example with the Shelly DS18B20 temperature sensor, this analog add-on is the next step towards one inexpensive Wi-Fi module monitoring both temperature and voltage. You can find all Pill accessories together in the Shelly Pill category.

Who is the Shelly Analog 0-30 V Add-on for

  • For owners of off-grid solar systems and cottages who want to see the battery voltage remotely.
  • For caravanners and sailors who need to monitor a 12 V or 24 V on-board battery.
  • For makers and DIY enthusiasts connecting soil moisture sensors, photoresistors and other analog sensors.
  • For Home Assistant and MQTT users who want a cheap and small Wi-Fi voltmeter.
  • For technicians monitoring industrial sensors with 0-5 V or 0-10 V outputs.

Use cases

  • 12 V battery voltage monitoring in a caravan or boat: a mobile alert when the battery drops below a set threshold.
  • Monitoring a 24 V solar battery at a cottage: voltage history in the app and automatic disconnection of appliances when the battery is low.
  • Checking a backup power supply (UPS) or a 12 V/24 V power supply: you will know immediately when the supply fails.
  • 0-10 V analog sensors: pressure, level, flow or humidity from industrial sensors directly in your smart home.
  • Hobby projects: a soil moisture sensor for watering the garden, a photoresistor for dimming lights, the voltage of a 3.7 V Li-ion cell.
  • Contact and measurement in one: connect a door contact or float switch to IO2/IO3 while measuring voltage at the same time.

Key features

  • 0 to 30 V DC range: 12 times wider than the built-in analog input of the Pill (0 to 2.5 V).
  • ±(2 % + 5d) accuracy: reliable monitoring of batteries and power supplies.
  • 2 digital I/O (IO2, IO3): configurable as input or output, 3.3 V logic.
  • 5 V output: powers connected sensors without an extra power supply.
  • Common GND: simple and clear wiring.
  • Plug-and-play: plug it into the 5-terminal add-on and set it up in the app, no soldering.
  • Compact size: 36.5 × 26.5 × 11.5 mm and only 8 g.
  • Automations: scenes and notifications based on the measured voltage in Shelly Smart Control.

Technical specifications

ParameterValue
ManufacturerShelly
Voltmeter range (DC)0 to 30 V
Measurement accuracy±(2 % + 5d)
Inputs/outputs1× analog input AN, 2× digital I/O (IO2, IO3)
Digital input triggeringActive LOW; LOW < 0.83 V, HIGH > 2.48 V
Max. digital input voltage3.3 V
Output: max. switching voltage/current3.3 V (logic level) / 20 mA
Power terminals5 V, GND (optional)
InterfaceConnector for the 5-Terminal Add-on (Micro USB to 5 terminals)
Dimensions (H × W × D)36.5 × 26.5 × 11.5 mm
Weight8 g
ColorBlack
Operating temperature0 to 40 °C
Storage temperature-20 to 40 °C
Humidity30 to 70 % RH
Max. altitude2000 m

Protocols and compatibility

  • Shelly Pill: the add-on works exclusively with the Shelly Pill module, it is not compatible with other Shelly devices or with the Plus Add-on.
  • 5-terminal add-on (required): to connect it to the Pill you need the Shelly Micro USB to 5-Terminal Add-on, which is not included.
  • Wi-Fi and Bluetooth: communication is handled by the Shelly Pill, the add-on itself has no wireless module.
  • Shelly Smart Control: display of measured voltage, notifications, scenes and automations.
  • Home Assistant, MQTT, REST API: data is available via the local interfaces of the Shelly Pill, so you can use it in your own smart home system.
  • Limitation: measures only DC voltage up to 30 V. It is not designed for measuring 230 V AC mains voltage and must not be connected to it.

Why choose the Shelly Analog 0-30 V Add-on

  • The most affordable Wi-Fi voltmeter for a smart home: together with the Pill and the 5-terminal add-on you get remote voltage measurement for a fraction of the price of typical battery monitors.
  • Measuring and switching in one: an analog input complemented by two digital I/O.
  • No soldering: the modular Pill system can be wired and rebuilt in a few minutes.

Compared to the 5-terminal add-on alone, which can measure only 0 to 2.5 V on IO1, you get a range of up to 30 V without an external voltage divider. If you are more interested in switching loads than measuring, go for the Shelly SSR Add-on, and for several temperature probes at once there is the Shelly 1 to 5 splitter.

Frequently asked questions

What do I need for the Shelly Analog 0-30 V Add-on to work?+

The Shelly Pill module and the Shelly Micro USB to 5-Terminal Add-on. The analog add-on plugs into the 5-terminal add-on, which connects to the Pill. The Pill is powered from 5 V.

Is the 5-terminal add-on included in the package?+

No, it is sold separately. The package contains only the analog add-on itself.

Can I measure the voltage of a 12 V car battery?+

Yes. The 0 to 30 V DC range covers 12 V and 24 V batteries, including the voltage while charging (approx. 14.4 V or 28.8 V).

Can it measure 230 V from a wall socket?+

No. The add-on measures only DC voltage up to 30 V. Connecting mains voltage would destroy the module and is life-threatening. To measure consumption on a 230 V circuit, use Shelly devices with power metering.

How accurate is the measurement?+

The manufacturer states ±(2 % + 5d). At 12 V this is roughly ±0.25 V plus a deviation in the last digits, which is more than enough for tracking battery charge and discharge.

What is the difference from the analog input on the 5-terminal add-on?+

The IO1 input on the 5-terminal add-on measures only 0 to 2.5 V. The analog add-on extends the range to 0 to 30 V, so you do not need your own resistor divider.

Can I connect a sensor with a 0-10 V output?+

Yes, both 0-5 V and 0-10 V outputs are within the add-on range. If the sensor needs a 5 V supply, you can power it from the module 5 V terminal (for sensors with a higher supply voltage, use an external power supply with a common ground).

What are the IO2 and IO3 pins for?+

They are digital inputs/outputs with 3.3 V logic. As inputs, you can connect a button, reed contact or float switch (activated by connecting to ground). As outputs, they handle max. 20 mA, for example for an LED or a control signal.

Can I switch a relay or pump directly from the IO output?+

Not directly, 20 mA at 3.3 V is not enough. To switch a load, use the Shelly SSR Add-on for Shelly Pill or another Shelly relay controlled by an automation based on the measured voltage.

Does the add-on work with Home Assistant?+

The measured values are sent by the Shelly Pill, which supports local interfaces (MQTT, REST API) as well as the Shelly integration in Home Assistant. We recommend updating the Pill firmware to the latest version before deployment.

The app does not show the voltage, what should I check?+

Check that the add-on is properly inserted into the 5-terminal add-on, that the analog add-on is selected in the Pill settings and that you have the latest firmware. Also check the common ground: the negative of the measured source must be connected to GND.

Can I use it outdoors or in a garage?+

The operating temperature is 0 to 40 °C and humidity 30 to 70 % RH, so it is intended for indoor use. Outdoors or in an unheated garage, place it in a suitable enclosure and keep in mind that it is out of specification in freezing temperatures.

Our store reviews

★★★★★

„Veľmi dobrá komunikácia. Informovali ma o odoslaní tovaru a aj o problémoch, ktoré vznikli pri jeho doručení na strane kuriérskej spoločnosti.“
(Very good communication. They informed me about the shipment and also about the problems that arose with its delivery on the courier company side.)

Michal Poracký · Shoptet store review · 12. 5. 2026

★★★★★

„Všetko v poriadku, výborná cena, rýchle dodanie“
(Everything fine, great price, fast delivery)

Martin Vyšný · Shoptet store review · 20. 5. 2026

★★★★★

„funguje ako som očakával, rýchle dodanie, odporúčam“
(works as I expected, fast delivery, I recommend)

Tomáš Sadloň · Shoptet store review · 3. 6. 2026

★★★★★

„Rýchle, jednoduché, spokojnosť :)“
(Fast, simple, satisfied :))

Ondrej Tabák · Shoptet store review · 20. 8. 2026

All reviews of our store (5.0 out of 5, more than 1,100 reviews)

Additional parameters

Category: Lighting and switching accessories
Warranty: 2 years
EAN: 3800238073596
? Device type: Expansion module
System compatibility: Shelly
Communication: Wi-Fi
Measuring range: 0 to 30 V DC
Measurement accuracy: ±(2 % + 5d)
Inputs/outputs: 1× analog input AN, 2× digital I/O (3.3 V)
Max. output switching current: 20 mA
Power output: 5 V
Compatibility: Shelly Pill (requires Micro USB to 5-Terminal Add-on)
Dimensions: 36.5 × 26.5 × 11.5 mm
Weight: 8 g
Color: Black
Operating temperature: 0 to 40 °C

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Stlačením tlačidla ODOSLAŤ HODNOTENIE zákazník potvrdzuje, že bol oboznámený s podmienkami ochrany osobných údajov. *

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Stlačením tlačidla POSLAŤ KOMENTÁR zákazník potvrdzuje, že bol oboznámený s podmienkami ochrany osobných údajov. *

Shelly products at the best prices

The Shelly brand is probably the most groundbreaking brand in the field of smart home products these days. New products that come out of this manufacturer's workshop every month complement smart homes not only on the WiFi protocol, but also on Z-Wave. Shelly has everything from relays, dimmers and sensors to energy consumption meters in its portfolio.

Among the very distinctive products of this brand are Shelly Mini modules, which are the smallest modules on the market. They are available in both WiFi and Z-Wave versions.

Shelly smart home