Nice Smart-Control

Code: SMART-CONTROL
New arrival Works with FIBARO
Not rated Rating details
€54,12 €44 excl. VAT Measure price:
In stock (10 pcs)
Delivery to:
30.10.2026
Delivery options

Nice Smart-Control is a miniature universal Z-Wave module with a built-in temperature sensor that adds intelligence to your gate, alarm, boiler or blinds. It has 2 inputs and 2 potential-free outputs, supports up to 6 DS18B20 temperature probes or 1 DHT22 and is controlled via the Yubii Home app.

📝 Note: Originally known as FIBARO Smart Implant, now under the new name Nice Smart-Control.

Detailed information

Discounts
Product of the week

Product detailed description

Universal Z-Wave module Nice Smart-Control: smart features for ordinary wired devices

Nice Smart-Control is a small universal Z-Wave module with a built-in temperature sensor that turns ordinary wired devices into a fully fledged part of your smart home. Connect a gate operator, alarm panel, thermostat, boiler, binary or analogue sensors and control them remotely from the Yubii Home app or from any certified Z-Wave controller.

With dimensions of only 29 x 18 x 13 mm, it fits into a wall box, a gate operator housing or next to an alarm panel, so you don't need to change your existing installation, just extend it.

Nice Smart-Control universal Z-Wave module for the smart home

Two inputs and two outputs for real automation

The module has 2 inputs that you configure according to what you connect: an NC or NO alarm input, a monostable or bistable button, or an analogue 0 to 10 V input (2-wire or 3-wire sensor). Two potential-free outputs (max. 150 mA, 30 V DC or 20 V AC) switch external circuits, for example the impulse input of a gate operator, a boiler input or a blind control unit.

The outputs can work independently of the inputs, or you can link them to the inputs. Each output has an auto-off function adjustable from 0.1 seconds up to 45 minutes, so you can easily turn it into an impulse for a gate or garage door. You can switch the output logic (NO or NC) with a parameter, without rewiring.

Garage door control via the Nice Smart-Control universal Z-Wave module

Temperature and humidity: built-in sensor and external probes

Smart-Control has a built-in temperature sensor and its separate 1-wire input lets you connect up to 6 DS18B20 temperature probes or 1 DHT22 temperature and humidity sensor. A DS18B20 probe in a protective housing can be placed in the floor, in concrete, in a damp environment or even under water, for example in a buffer tank, water heater, swimming pool or heating pipe. The probe cable can be up to 3 m long. Ready-made probes are available as temperature sensors for Smart Implant.

Values are sent to the controller when they change by a set amount (0.5 °C by default) or periodically. This turns the module into a Z-Wave temperature sensor for several locations at once, or together with an output into a complete smart boiler thermostat..

Boiler and heating control with the Nice Smart-Control Z-Wave module and temperature sensor

Secure and stable Z-Wave network

As a Z-Wave Plus device it supports S0 (AES-128) and S2 Authenticated encryption and inclusion via SmartStart by scanning a QR code. Because it is permanently powered, it also works as a Z-Wave signal repeater and strengthens the whole network. The range is up to 40 m indoors and up to 50 m outdoors, depending on the building structure. The inputs can trigger scenes directly (Central Scene) and, through associations, control up to 5 other Z-Wave devices per input, even without the controller.

Connecting a wired alarm to the smart home via Nice Smart-Control

From FIBARO to NICE

Do you want to know more about why FIBARO products started being sold under the NICE brand and why the FIBARO HC3 is now named Yubii Home PRO?

You can read all about it in the article FIBARO transitions to the NICE brand.

Who is Nice Smart-Control for

  • Homeowners with a gate or garage door operator who want to control it from their phone and see its status.
  • Users of a wired alarm system who want to bring zone and alarm states into their smart home.
  • Anyone who wants smart boiler control or temperature measurement in several places (underfloor heating, water heater, utility room).
  • Electricians and installers of Yubii Home, FIBARO Home Center 3 and other Z-Wave systems who need a universal “converter” to potential-free contacts.

Use cases

  • Gate control from your phone: an output sends an impulse to the gate operator, an input with a limit switch reports whether the gate is open..
  • Alarm integration into the smart home: connect the NC or NO outputs of the alarm panel to the inputs and arm or disarm the alarm with an output.
  • Thermostat for a gas boiler: an output closes the boiler “ON/OFF” input, the temperature is measured by the built-in sensor or a DS18B20 in the room.
  • Temperature in a water heater, buffer tank or pool: up to 6 DS18B20 probes on one module.
  • Humidity measurement in a basement or bathroom: a DHT22 sensor and automatic switching of a fan or dehumidifier.
  • Analogue 0 to 10 V sensors: for example a light, pressure or level sensor with a voltage output.
  • A classic button as a scene controller: single, double and triple click or hold triggers different scenes. 🏠

Connecting sensors to the Nice Smart-Control Z-Wave module

Main features

  • 2 configurable inputs: NC/NO alarm, monostable/bistable button or analogue 0 to 10 V.
  • 2 potential-free outputs: switching external circuits up to 150 mA, independent of the inputs.
  • Built-in temperature sensor: temperature measurement right at the installation point.
  • External probes: up to 6x DS18B20 or 1x DHT22 (temperature and humidity).
  • Output auto-off: 0.1 s to 45 min, ideal for impulse control of gates.
  • Scenes and associations: Central Scene and direct control of up to 5 devices per input.
  • S0 and S2 security: encrypted communication and SmartStart inclusion.
  • Signal repeater: extends the range of the Z-Wave network.
  • Miniature dimensions: 29 x 18 x 13 mm, safe low voltage supply 9 to 30 V DC.

Nice Smart-Control with wiring harness for inputs, outputs and probes

Technical specifications

Parameter Value
Model Nice SMART-CONTROL
Power supply 9 to 30 V DC ±10 %
Inputs 2x analogue 0 to 10 V or binary, 1x serial 1-wire input (DS18B20 / DHT22)
Outputs 2x potential-free
Max. output current 150 mA
Max. output voltage 30 V DC / 20 V AC ±5 %
Supported digital sensors 6x DS18B20 or 1x DHT22
Max. probe cable length 3 m
Built-in sensor measuring range -55 °C to 126 °C
Operating temperature 0 to 40 °C, indoor use only
Radio frequency (EU) 868.4 or 869.8 MHz
Range up to 40 m indoors, up to 50 m outdoors
Transmit power max. 7 dBm EIRP
Dimensions 29 x 18 x 13 mm
Installation in a wall box at least 60 mm deep
Compliance RoHS 2011/65/EU, RED 2014/53/EU, CE

Protocols and compatibility

  • Z-Wave Plus (500 series chip): fully compatible with certified Z-Wave and Z-Wave Plus controllers, S0 and S2 Authenticated security, SmartStart.
  • Nice Yubii Home and Yubii Home Pro: native support, control in the Yubii Home app. See Yubii Home or the more powerful Yubii Home Pro.
  • FIBARO Home Center 3 and Home Center 3 Lite: officially supported by the manufacturer, the module works with Home Center 3 and Home Center 3 Lite.
  • Other Z-Wave controllers (e.g. Home Assistant with Z-Wave JS, Homey): as a certified Z-Wave Plus device it should work with them too, but the range of exposed functions depends on the controller's support. The manufacturer guarantees full functionality with Yubii and FIBARO HC3.
  • Frequency: the EU version (868.4 MHz) must use the same frequency as your controller.

Why choose Nice Smart-Control

  • One small module replaces a separate Z-Wave temperature sensor, binary sensor and relay output.
  • Intelligence for your gate, alarm or boiler without replacing existing equipment.
  • Safe 9 to 30 V DC supply and potential-free contacts, easy to combine with control units from other manufacturers.
  • Proven hardware: it is the successor of FIBARO Smart Implant, now under the Nice brand and supported in the Yubii ecosystem.

Frequently asked questions

Is Nice Smart-Control the same as FIBARO Smart Implant?+

Yes, Smart-Control is the successor of the FIBARO Smart Implant (FGBS-222) module under the Nice brand. It has the same dimensions, inputs, outputs and probe support. The FIBARO brand moved under Nice, read more in the article FIBARO transitions to the NICE brand.

Can I connect Smart-Control directly to 230 V?+

No. The module is powered by a safe 9 to 30 V DC voltage and the outputs handle max. 30 V DC or 20 V AC at 150 mA. To switch a 230 V load, use an interposing relay or the Nice On/Off Control2.

How do I control a gate with Smart-Control?+

Connect output OUT1 to the impulse (step-by-step) input of the gate control unit, set the input as a monostable button and the output auto-off to 0.1 s. Each impulse starts or stops the gate. You can connect a limit switch to an input and monitor the gate status.

How many temperature probes can I connect?+

Up to 6 DS18B20 probes in parallel, or 1 DHT22 sensor (temperature and humidity). The two types cannot be combined. You always have the built-in temperature sensor as well.

Does Smart-Control work with Yubii Home and FIBARO HC3?+

Yes, the manufacturer lists support for Yubii Home, Yubii Home Pro, FIBARO Home Center 3 and Home Center 3 Lite.

Can it be used with Home Assistant?+

Smart-Control is a certified Z-Wave Plus device, so it should pair with a Z-Wave coordinator and the Z-Wave JS integration. However, full support of all endpoints depends on the Z-Wave JS device database; the manufacturer does not officially list it.

How do I add the module to a Z-Wave network?+

Put the controller into inclusion mode and quickly press the button on the module three times (or a button connected to IN1/IN2). For S2, scan the QR code or enter the 5-digit PIN from the label on the box. With SmartStart, the module is added automatically within 10 minutes of being powered on after the QR code is scanned. Keep the box with the code.

The module won't pair, what should I do?+

First remove the module from the controller (exclusion) or reset it: hold the button until it glows yellow, then briefly confirm. Also check that the module uses the same frequency as the controller and that the antenna is not near metal parts. The module has a built-in range test (magenta colour in the menu).

Can I shorten the antenna?+

No, the antenna length is precisely matched to the frequency. Place it as far as possible from metal objects and metal boxes, otherwise the range will be reduced.

What power supply do I need?+

Any stabilised 9 to 30 V DC supply; you can often use the auxiliary 12 V or 24 V output of a gate or alarm control unit. 2-wire analogue 0 to 10 V sensors require a 12 V supply.

Can I use the module outdoors?+

The module itself is for indoor use only (0 to 40 °C) and must not come into contact with moisture. Outdoors, place it in the gate operator housing or a waterproof box. An external DS18B20 probe in a protective housing can be outdoors.

Are temperature probes included?+

No, the package contains 1 Smart-Control module. Buy external DS18B20 or DHT22 probes as needed; the built-in temperature sensor works without them.

Reviews of our store

★★★★★

„spoľahlivý obchod s odbornosťou“
(reliable store with expertise)

Michal Hrubjak · Shoptet store review · 23. 10. 2026

★★★★★

„funguje ako som očakával, rýchle dodanie, odporúčam“
(works as I expected, fast delivery, I recommend)

Tomáš Sadloň · Shoptet store review · 3. 6. 2026

★★★★★

„Všetko v poriadku, výborná cena, rýchle dodanie“
(Everything fine, great price, fast delivery)

Martin Vyšný · Shoptet store review · 20. 5. 2026

★★★★★

„Veľmi dobrá komunikácia. Informovali ma o odoslaní tovaru a aj o problémoch, ktoré vznikli pri jeho doručení na strane kuriérskej spoločnosti.“
(Very good communication. They informed me about the shipment and also about problems that arose during delivery on the courier company side.)

Michal Poracký · Shoptet store review · 12. 5. 2026

All reviews of our store

Additional parameters

Category: Produkty Z-Wave
Warranty: 2 years
EAN: 5902701703417
? Device type: Sensor
? Power supply: 12-24VDC
? Supported in system: Fibaro HC3, FIBARO HC3 LITE
? Wireless protocol: Z-Wave Plus
? Sensor type: Temperature sensor
Farba: Biela
Model: SMART-CONTROL
Power supply: 9 to 30 V DC
Inputs: 2x analogue 0 to 10 V / binary, 1x 1-wire (DS18B20 or DHT22)
Output: 2x potential-free
Max. output: 150 mA at 30 V DC / 20 V AC
Supported digital sensors: 6x DS18B20 or 1x DHT22
Dimensions: 29 x 18 x 13 mm

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Stlačením tlačidla ODOSLAŤ HODNOTENIE zákazník potvrdzuje, že bol oboznámený s podmienkami ochrany osobných údajov. *

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Stlačením tlačidla POSLAŤ KOMENTÁR zákazník potvrdzuje, že bol oboznámený s podmienkami ochrany osobných údajov. *

Bring the perfect synergy of technology and elegance to your home. The Italian brand Nice is a globally recognized leader in the automation of entrance gates, garage doors, and shading systems, while actively expanding its portfolio with comprehensive Smart Home solutions.

By integrating with systems like Yubii or FIBARO, you can control not only access to your home but also lighting, heating, and security under one roof. Nice products feature an innovative approach, high reliability, and award-winning design that will never disrupt the aesthetics of your exterior or interior.