MOES Zigbee mmWave Ceiling Presence Sensor for Tuya
Code: ZSS-QY-HPRelated products
Product detailed description
MOES ZSS-QY-HP ceiling radar presence sensor for Zigbee and Tuya 💡
MOES ZSS-QY-HP is a ceiling-mounted Zigbee presence sensor with radar detection that reliably recognizes whether someone is in the room. It picks up not only walking but also micro-movements and breathing, so it knows you are home even when you are just sitting at your desk, reading or sleeping. Lights, heating or air conditioning react to real presence, not just to whether you walked past a moment ago.
The sensor is recessed directly into the ceiling or a plasterboard suspended ceiling, powered from the 230 V mains and connected through a Zigbee gateway to the MOES, Tuya Smart or Smart Life app. The ZSS-QY-HP model (manufacturer code ZSS-QY-HP-MS, also listed as ZSSQYHP) also measures light intensity, so it switches the lights on only when the room is really dark.

A classic PIR motion sensor reacts only to a change in heat, meaning more noticeable movement. When you stop moving for a few minutes, it decides the room is empty and switches the light off above your head. A radar presence detector works differently: it emits a microwave signal and tracks even tiny changes, such as chest movement while breathing. This lets it distinguish movement, static presence and micro-movement and report the room status accurately.
You set the detection range in the app from 0 to 9 m and limit it with a minimum and maximum distance. This is especially useful in smaller rooms, where a sensor at full range could pick up movement behind a wall or reflections from furniture. You set the sensitivity on a scale of 0 to 9 (default 7): a higher value catches even subtle micro-movement, a lower one suppresses interference from weaker sources.

You can fine-tune accuracy with timing too. The detection confirmation time (0 to 0.5 s) determines how quickly the sensor reports someone entering, so the light comes on practically instantly. The fading delay from 20 s to 25 minutes prevents the light from switching off just because you held your breath for a moment or are not moving. The manufacturer recommends not setting it below 15 seconds.

A detection delay, adjustable from 0 to 10 seconds, filters out random triggers. The sensor then reports presence only once it has registered it long enough, which significantly reduces false triggers, for example from a curtain in the breeze or a pet running past.

The built-in light sensor measures light from 0 to 2000 lx. In scenes you can set the light to come on only when someone is present and it is also getting dark, and to stay off during the day. You save energy and do not have to think about switches. If you are building a smart home on the Tuya platform, you can link the sensor with smart switches, thermostats and other devices in one app.
To operate it you need a Tuya Zigbee gateway, which is not included. The MOES ZHUB-W Zigbee gateway with Wi-Fi works reliably, for example. You then control the sensor from your phone from anywhere, see the current status and the distance of the detected person, and you can share access to the device with the whole family.

The round white panel with a diameter of 93 mm looks discreet on the ceiling, similar to a recessed spotlight. You fit it into the suspended ceiling in an 80 mm diameter hole, where spring clips hold it in place. Because the occupancy sensor is powered directly from the 230 V mains, you do not have to change batteries and the radar can work continuously.
Who the sensor is for:
- For homes with a plasterboard suspended ceiling that want the sensor recessed into the ceiling instead of a box on the wall.
- For new builds and renovations, where an electrician prepares a 230 V supply directly in the ceiling.
- For users of the Tuya Smart, Smart Life or MOES app who already have a Zigbee gateway.
- For Home Assistant fans using Zigbee2MQTT who want local presence-based automations.
- For offices and studies, where people sit still for a long time and a classic PIR sensor switches the lights off on them.
Use cases
- Automatic living room light that stays on while you watch TV: the radar detects even a person who does not move from the sofa all evening.
- Presence sensor for the bathroom and toilet: the light and fan run while you are inside and switch off after you leave. With a low mounting height, just shorten the range.
- Heating control based on room occupancy: the thermostat lowers the temperature in an empty room and raises it when you come back.
- Night lighting in the bedroom and hallway: combined with the light sensor, dimmed lighting comes on only in the dark.
- Energy savings in the office and meeting room: lights and air conditioning switch off when the last person leaves the room.
- Remote presence check at home: the app shows whether someone is in the room, and you can set up a notification. 🏠
Key features
- Static presence detection: recognizes a person sitting, lying or sleeping by micro-movements and breathing.
- Adjustable range: minimum and maximum detection distance from 0 to 9 m.
- Sensitivity 0 to 9: fine-tuning to the size and furnishing of the room.
- Fast response: presence confirmation time of only 0 to 0.5 s.
- Fading delay 20 s to 25 min: the light does not switch off during a short period of stillness.
- Light sensor: measures 0 to 2000 lx for daylight-dependent scenes.
- Recessed ceiling mounting: discreet round ∅93 mm panel for a ∅80 mm hole.
- 230 V power supply: no batteries, continuous operation.
- Zigbee 3.0: energy-efficient and stable communication via a Tuya Zigbee gateway.
Technical specifications
| Parameter | Value |
|---|---|
| Model | ZSS-QY-HP (ZSS-QY-HP-MS) |
| Sensor type | Microwave radar presence sensor |
| Radar frequency | 5.8 GHz |
| Radar transmit power | 3 to 5 dBm |
| Power supply | 100 to 250 V AC |
| Current draw | max. 70 mA |
| Detection range | 0 to 9 m (default 7 m) |
| Recommended mounting height | 2 to 4 m |
| Detection zone diameter | static presence 2 to 6 m, movement and micro-movement 8 to 12 m |
| Sensitivity | 0 to 9 (default 7) |
| Detection confirmation time | 0 to 0.5 s |
| Fading delay | 20 s to 25 min |
| Light measurement | 0 to 2000 lx |
| Mounting | recessed into the ceiling, spring clips |
| Cut-out hole | ∅80 mm |
| Dimensions | panel ∅93 × 30 mm, rear part 65 × 70 mm |
| Operating temperature | -20 to +70 °C |
| Certification | CE (RED, LVD, EMC, RoHS) |
| Package contents | presence sensor, user manual |
Protocols and compatibility
- Zigbee 3.0: the sensor communicates in the 2.4 GHz band and requires a Zigbee gateway, which is not included. The manufacturer recommends a Tuya Zigbee gateway, for example the MOES ZHUB-W or the Nous Smart Zigbee gateway for Tuya.
- MOES, Tuya Smart and Smart Life apps: full configuration of range, sensitivity, timing and scenes. The manufacturer recommends the MOES app, Tuya Smart and Smart Life work as well.
- Home Assistant (Zigbee2MQTT): the sensor is supported, with presence, target distance, illuminance, sensitivity, range, detection delay and fading time available.
- Home Assistant (ZHA) and other Zigbee gateways: the manufacturer does not state full support. It is a Tuya device, so not all settings may work with gateways from other brands.
- Voice assistants: the manufacturer does not list direct Amazon Alexa or Google Assistant support for this model. You set up presence-based automations in scenes in the Tuya Smart or Smart Life app.
Why choose the MOES ZSS-QY-HP
- The light no longer switches off while you sit quietly, read or sleep.
- The recessed ceiling panel looks like a spotlight, not another box on the wall.
- 230 V power means no batteries and continuous, accurate detection.
- The light sensor and detailed app settings let you fine-tune automations exactly for your room.
Compared with the MOES Zigbee mmWave Presence Sensor HP02, the ZSS-QY-HP is permanently mounted in the ceiling and powered from the 230 V mains, making it a good fit for suspended ceilings and new builds. The HP02 is the better choice if you do not want to drill or wire anything: it is powered via USB-C and attaches to a wall or shelf with a magnetic holder.
Frequently asked questions
Our store reviews
★★★★★
„spoľahlivý obchod s odbornosťou“
(reliable store with expertise)
Michal Hrubjak · Shoptet store review · 23. 10. 2026
★★★★★
„funguje ako som očakával, rýchle dodanie, odporúčam“
(works as I expected, fast delivery, I recommend it)
Tomáš Sadloň · Shoptet store review · 3. 6. 2026
★★★★★
„Všetko v poriadku, výborná cena, rýchle dodanie“
(Everything fine, great price, fast delivery)
Martin Vyšný · Shoptet store review · 20. 5. 2026
★★★★★
„Veľmi dobrá komunikácia. Informovali ma o odoslaní tovaru a aj o problémoch, ktoré vznikli pri jeho doručení na strane kuriérskej spoločnosti.“
(Very good communication. They informed me about the shipment and also about the problems that arose with its delivery on the courier company’s side.)
Michal Poracký · Shoptet store review · 12. 5. 2026
See all reviews on the Store rating page.
Additional parameters
| Category: | Motion and presence sensors |
|---|---|
| Warranty: | 2 years |
| EAN: | 6974246476124 |
| ? Device type: | Presence sensor |
| ? Power supply: | 230V |
| ? Sensor type: | Motion sensor, Light intensity sensor, Presence sensor |
| ? Device color: | White |
| System compatibility: | Google Home, Amazon Alexa, SmartThings, Tuya |
| Communication: | Zigbee |
| Measures / detects: | Presence, Illuminance |
| Usage: | Indoor |
| Model: | ZSS-QY-HP (ZSS-QY-HP-MS) |
| Detection technology: | 5.8 GHz microwave radar |
| Wireless protocol: | Zigbee 3.0 |
| Detection range: | 0 to 9 m (presence zone ∅2 to 6 m) |
| Power supply: | 100 to 250 V AC |
| Mounting: | recessed into the ceiling, ∅80 mm hole |
| Diameter: | 93 mm |
| Operating temperature: | -20 °C to +70 °C |
| Color: | White |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
