Product detailed description

📡 2-Channel Z-Wave DIN Rail Module with Power Metering

The ultimate and cleanest smart home solution for new builds, homes, and commercial spaces. The Shelly Qubino Wave Pro 2PM is a professional 2-channel smart relay that supports switching loads up to 16 A per channel (with a total device limit of 25 A). It is primarily designed for the automation of lighting and heavy appliances, centralized directly from your main electrical breaker box.

This module comes equipped with integrated power meters (PM) on both circuits. This means you don't just turn the power on and off—you gain perfect insight into the real-time electricity consumption (in Watts and kWh) of your connected devices. You can effortlessly set up various automations, scenarios, and schedules to sync your home environment with your daily routines or to actively reduce your energy bills.

Powered by the latest Z-Wave 800 Series (S800) chip, this device offers incredible reliability and can be integrated into any certified Z-Wave gateway (Home Assistant, Fibaro, Homey, etc.), seamlessly interacting with sensors from entirely different manufacturers.

A major advantage is its direct installation onto a standardized 35 mm DIN rail inside your electrical cabinet. This guarantees a clean, highly organized installation without the hassle of cramming modules behind wall switches. It does, however, require a star-topology wiring setup. The Shelly Qubino Wave PRO 2PM also features physical switch inputs, allowing you to continue controlling your connected lights anytime via traditional hardware wall buttons.

Extended 5-Year Warranty

All products from the premium Shelly PRO series are covered by an extended quality guarantee. When you purchase this product, you receive a full 5-year manufacturer's warranty.

Features of the Shelly Qubino Wave PRO 2PM

• Z-Wave 800 Operation: Include the Wave Pro 2PM in your Z-Wave network and control it remotely from anywhere. It provides stunning wireless range, minimal standby power consumption, and high network reliability.
• 2x 16A Output with PM: Connect two heavy-duty appliances up to 16A each (total max 25A). Each output independently measures and reports both power and accumulated energy.
• DIN Rail Mounting: Specifically designed for installation inside breaker boxes, adhering to global DIN size standards.
• Associations: Establish direct radio communication between other sensors or switches in your local Z-Wave network to trigger actions instantly without waiting for a hub response.
• Highest Level of Security: Includes the device using the S2 Authenticated protocol for strictly encrypted communication, keeping cyber-attacks at bay.
• Smart Protections: Built-in overload and overvoltage software features will automatically shut down the channel in the event of a short circuit, protecting both the module and your wiring.

Technical Specifications

• 🔌 Device Power Supply: 110-240 V AC, 50/60 Hz
• ⚡ Standby Energy Consumption: < 0.3 W
• 🔋 Max. AC Switching Voltage: 240 V
• ⚙️ Max. AC Switching Current: 2x 16 A (total must not exceed 25 A)
• 🔋 Max. DC Switching Voltage: 30 V
• ⚙️ Max. DC Switching Current: 2x 16 A
• 🔥 Overheat, Overvoltage, and Overload Protection: Yes (fully protected by hardware and software)
• 📡 Distance (Network Range): Up to 40 m indoors (depending on local walls and obstacles)
• 🔄 Z-Wave® Repeater Function: Yes (boosts signal for devices further away)
• 💻 CPU Processor: Z-Wave® S800 Series
• 📶 Z-Wave® Frequency Band: 868.4 MHz (Europe)
• 📡 Max. RF Transmit Power: < 25 mW
• 📏 Dimensions (H x W x D): 94 x 19 x 69 mm (occupies only 1 DIN slot)
• ⚖️ Weight: 60 g
• 🔧 Mounting: On a standard 35 mm DIN rail
• 🔩 Terminal Tightening Torque: 0.4 Nm
• 🔌 Wire Cross-Section (Green Connector): 0.5 to 2.5 mm²
• ✂️ Wire Stripping Length: 6 to 7 mm
• 🛡️ Housing Material: Fire-retardant plastic
• 🌡️ Operating Ambient Temperature: -20 °C to 40 °C

📝 Note: A Z-Wave controller (Smart Hub) is strictly required for the initial pairing, configuration, and remote control of this relay. The device does not communicate via Wi-Fi.