Product detailed description

⚙️ Z-Wave 800 DIN Rail Module with a Potential-Free Output

The ultimate smart relay solution for new home builds and commercial spaces. The Shelly Qubino Wave Pro 1 is a professional 1-channel relay supporting a robust load of up to 16 A. It is meticulously designed to automate lighting and heavy smart appliances for residential or commercial use. Its greatest feature is the potential-free output (dry contact), which offers immense wiring flexibility—the relay does not pass the mains voltage through and functions simply as a mechanical switch. This means you can use it to securely control other voltages, such as 12V/24V DC circuits for LED strips, garage door opener triggers, or boiler heating thermostats.

Powered by the latest embedded Z-Wave 800 Series (S800) chip, this device guarantees absolute reliability across any compatible Z-Wave control gateway (like Fibaro, Home Assistant, Hubitat, etc.), allowing seamless interoperability with devices from completely different manufacturers. The Z-Wave 800 technology ensures instant response times, extreme range, and minimal power consumption.

Another major advantage is its clean installation format directly onto a standard 35 mm DIN rail in your main distribution board, saving you from stuffing modules into cramped wall boxes. Furthermore, the Shelly Qubino Wave PRO 1 features an input for a physical wall switch, ensuring you can still operate your connected devices manually with traditional hardware buttons.

Extended 5-Year Warranty

All products belonging to the premium Shelly PRO series fall under Shelly's extended quality guarantee. By purchasing this device, you receive a full 5-year manufacturer's warranty.

Features and Benefits of the Shelly Qubino Wave PRO 1

• Dry Contact Output: The relay output is galvanically isolated from the power supply. You can safely switch a wide range of voltages, supporting seamless switching of alternating current (AC) up to 240V and low-voltage direct current (DC) up to 30V.
• Output up to 16A: The device safely manages high electrical loads for more demanding household appliances.
• Z-Wave 800 Operation: Easily include the Wave Pro 1 into your Z-Wave mesh network to control it remotely from anywhere. It also acts as a robust signal repeater for devices located further away.
• Direct Associations: Establish direct, ultra-fast radio communication between sensors or switches in your local Z-Wave network, executing triggered actions instantly even if your central hub goes offline.
• Highest Level of Security: Included via the Security 2 (S2) Authenticated protocol, the module ensures strictly encrypted communication, locking down your home network against unauthorized access.

Technical Specifications

• 🔌 Device Power Supply: 110-240 V AC, 50/60 Hz
• ⚡ Standby Energy Consumption: < 0.3 W
• 🔋 Max. AC Switching Voltage: 240 V
• 🔌 Max. AC Switching Current: 16 A
• 🔋 Max. DC Switching Voltage: 30 V
• 🔌 Max. DC Switching Current: 16 A
• 🔥 Overheat Protection: Yes (internal component protection; lacks software overvoltage protection since it does not meter power)
• 📡 Distance (Network Range): Up to 40 m indoors (depending on local walls and obstacles)
• 🔄 Z-Wave® Repeater Function: Yes
• 🖥️ Processor: Z-Wave® 800 Series (S800)
• 📶 Z-Wave® Frequency Band: 868.4 MHz (Europe)
• 📡 Max RF Transmit Power: < 25 mW
• 📏 Dimensions (H x W x D): 94 x 19 x 69 mm (occupies only 1 slot on a DIN rail)
• ⚖️ Weight: 60 g
• 🛠️ Mounting: Standard 35 mm DIN rail inside a distribution board
• 🔩 Terminal Tightening Torque: 0.4 Nm
• 🔗 Supported Wire Cross-Section: 0.5 to 2.5 mm² (green connector)
• ✂️ Wire Stripping Length: 6 to 7 mm
• 🛡️ Housing Material: Flame-retardant plastic
• ⚫ Color: Black
• 🌡️ Operating Ambient Temperature: -20 °C to +40 °C

📝 Note: A compatible Z-Wave controller (Smart Hub) is strictly required to pair, program, and remotely control the device.