Product detailed description

⚙️ Z-Wave 800 DIN Rail Module with Three Independent Dry Contacts

The ultimate solution for new residential builds and commercial facilities. The Shelly Qubino Wave Pro 3 is a professional 3-channel relay supporting up to 16 A per channel (for a massive total of 48 A). It is designed for centralized lighting and appliance automation. Equipped with potential-free outputs (dry contacts), it offers absolute flexibility in voltage handling. This means you can use it to switch 3 completely different phases, control garage doors, or switch low-voltage DC (like LED strips or irrigation valves) simultaneously.

Powered by the built-in Z-Wave 800 chip with Z-Wave Long Range (ZWLR) support, this device can be reliably paired with any certified Z-Wave smart home hub. Shelly Qubino devices operate on the latest generation of chips (S800), ensuring excellent range, instant response times, and maximum reliability.

The main advantage of this device is its DIN rail mount format, allowing it to be installed directly inside your main electrical breaker box. This guarantees a clean, professional installation without the need to jam modules behind wall switches. Additionally, the Shelly Qubino Wave PRO 3 features 3 physical switch inputs, allowing you to continue controlling your connected devices manually via classic wall buttons or toggle switches.

Extended 5-Year Warranty

All products from the premium Shelly PRO series fall under Shelly's extended quality guarantee. When you purchase this product, you receive a full 5-year manufacturer's warranty.

Features and Benefits of Shelly Qubino Wave PRO 3

• 3 Independent Channels, 16 A Each: The Wave Pro 3 can handle a total device output of up to 48 A.
• Dry Contacts: The relays do not pass the mains voltage through. This allows you to switch a wide range of voltages, including alternating current (AC) and low direct current (DC), independently on each channel.
• Z-Wave and Z-Wave Long Range: The device is compatible with all certified Z-Wave gateways (Home Assistant, Fibaro, SmartThings, etc.). Furthermore, it supports Z-Wave Long Range for an incredible signal reach of over 1 km outdoors (requires a ZWLR-compatible hub).
• DIN Rail Mounting: Designed to fit cleanly into your breaker box, meeting global DIN rail standardization.
• Direct Associations: Create direct communication links with other Z-Wave devices in your local network (e.g., a wireless remote switch) and execute local actions even if the main gateway is offline.
• Highest Level of Security: Included via the Security 2 (S2) protocol for strictly encrypted communication, keeping your smart network safe from hackers.

Technical Specifications

• 🔌 Device Power Supply: 110-240 V AC, 50/60 Hz
• ⚡ Standby Energy Consumption: < 0.3 W
• 🔋 Max. AC Switching Voltage: 240 V
• 🔌 Max. AC Switching Current: 16 A per channel, 48 A in total
• 🔋 Max. DC Switching Voltage: 30 V
• 🔌 Max. DC Switching Current: 16 A per channel, 48 A in total
• 🔥 Overheat Protection: Yes (Note: the device does not measure power, so it lacks circuit overload/overvoltage software protection)
• 📶 Range (Z-Wave Mesh): Up to 40 m indoors (depending on obstacles and building materials)
• 🚀 Processor: Z-Wave® 800 Series (S800)
• 📡 Z-Wave® Frequency Band: 868.4 MHz (Europe) / 864 MHz (ZWLR)
• 📡 Maximum RF Transmit Power: < 25 mW
• 📏 Dimensions: 96 x 53 x 59 mm (occupies 3 DIN slots)
• ⚖️ Weight: 150 g
• 🔧 Mounting: Standard 35 mm DIN rail
• 🔩 Terminal Tightening Torque: 0.4 Nm
• 🔌 Wire Cross-Section: 0.5 to 2.5 mm²
• 🌡️ Operating Ambient Temperature: -20 °C to 40 °C

📝 Note: A Z-Wave smart hub (gateway) is strictly required to configure, program, and remotely control this device.