Product detailed description

Reliable Signal Amplifier for Long RGB LED Strips (AP100)

If you are building an ambitious lighting project and need to control an exceptionally long 3-channel RGB LED strip whose total power consumption significantly exceeds the maximum limits of your primary smart RGB controller, this auxiliary power module is exactly what you are looking for.

The AP100 amplifier fully supports both 12V and 24V lighting installations. By powerfully boosting the control signal, it allows you to reliably and safely manage loads up to a massive 24A, evenly distributed across 3 color channels (handling a maximum load of 8A per channel).

Installation and Wiring Options:

• Parallel Wiring to Protect Your Controller: Connect only the safe, low-power control signal from your smart RGB module to the Signal Input" terminal. Wire the heavy-duty main power from a robust power supply (rated up to 24A) directly into the "Input" terminals. Finally, connect your excessively long RGB LED strip to the "Output" terminals. The amplifier ensures that the high-power output is perfectly synchronized—mirroring color values and brightness instantly without any delay.
• Series Extension for Continuous Light Lines: Install this module exactly at the physical end of your first (main) LED strip run, right where voltage drop normally begins to occur. Bring in fresh auxiliary power from a secondary power supply into the side inputs, and smoothly draw out the continuation of your LED strip from the "Output" terminals, completely restoring its full, vibrant brightness.

Important Note: This hardware model is primarily designed for classic RGB strips (utilizing 3 channels). To operate it, it is absolutely essential to use a main controller (e.g., a smart receiver) and a sufficiently powerful power supply that matches the total length of your LED strip.