Zigbee, Z-Wave and Thread USB adapters

A USB adapter (dongle, coordinator) adds Zigbee, Z-Wave or Thread support to your Home Assistant, Raspberry Pi or server. It is the cheapest way to build your own hub without depending on the cloud.

Product sorting

2 items total

List of products

Listing controls

2 items total

How to choose a Zigbee or Z-Wave USB adapter

The coordinator runs your entire Zigbee or Z-Wave network, so a quality chip and a good antenna pay off. What matters is the protocol, the software (Zigbee2MQTT, ZHA, Z-Wave JS) and the connection – USB or a network coordinator over Ethernet/PoE.

  • Zigbee and Thread – Sonoff Dongle Plus MG24, Home Assistant Connect ZBT-2, SMLIGHT SLZB.
  • Z-Wave – Home Assistant Connect ZWA-2 or Sonoff Dongle PZG23 with a Z-Wave 800 chip and Long Range support.
  • Network coordinators – Ethernet and PoE versions can sit in the middle of the house, independent of the server.
  • Extension cable – keep the USB adapter away from the computer to reduce USB 3.0 interference.

Adapters are ideal for Home Assistant. For a ready-made solution without configuration see smart home hubs, and for more range signal repeaters.

Frequently asked questions

Does the adapter work with Zigbee2MQTT and ZHA?

Most of our Zigbee adapters support both integrations. We list compatibility for each product.

What is a Thread and Matter adapter?

Adapters with an MG21/MG24 chip can act as a Thread border router for Matter over Thread devices. One adapter is usually used either for Zigbee or for Thread at a time.

Can I run Zigbee and Z-Wave at the same time?

Yes, just use two adapters – one for Zigbee and one for Z-Wave.